The best engineered wood flooring for your home – Forbes consultant

Editorial note: We earn commission from partner links on Forbes Advisor.  Panels do not influence editors' opinions or ratings.

Compare quotes from top-rated local flooring contractors


When it comes to home improvements, no other remodeling project has as much impact as getting new floors. With so many flooring material options out there, engineered wood flooring comes out on top as one of the most affordable and popular options on the market.

Engineered flooring incorporates natural materials that imitate them, but in an engineered way. It features real wood veneer protected by a clear coat and an engineered core. While engineered wood flooring is an affordable flooring solution, you still want to take the time to review everything you can do about this type of flooring before investing.

How do I know I need new floors?

Whether you have hardwood, laminate, or tile floors, the wear and tear on the finish will be too noticeable to ignore. Most wood floors will last about 100 years with proper maintenance. Vinyl flooring can last about 50 years, while carpet lasts for about eight to 10 years.

However, if you bought an older home with floors showing signs of wear, or you’re ready to change the type of flooring, these are all good reasons to get new floors. Here are some common reasons why you should consider new flooring:

  • I’ve already refinished it – a lot
  • There are visible scratches and marks that will not disappear
  • There is water damage
  • Nailheads peeping through
  • Wood stain that cannot be easily repaired
  • Noticeable wear and tear
  • There are creaking or moving floorboards

Types of wooden floors

Engineered wood flooring has many classifications. They can be classified based on installation method, surface finish, texture, pressure applied in production and even wood species. The most basic and most important classification to consider is the installation method, as this will narrow down your selection of options even more.

How to install the adhesive

This method involves an adhesive that is applied to the joints to increase cohesion. Whether pre-adhesive or glued during installation, the adhesive installation method sticks the panels to the subfloor. The adhesive method is often used to install engineered wood floors over concrete subfloors.

Installation method

Although screw-on installation is not as common as other methods, it can help to attach the engineered wood floor to laminate flooring, making the installation process faster. In this case, engineered planks are installed to connect them to the subfloor.

Click-Lock installation method

Modern engineered wood flooring options use the click-lock installation method. This creates a floating floor by tapping the tongue and groove boards together. The click-lock method is also the most cost-effective option because no nails or glue are required.

The floor rests on top of a subfloor, fixed with its own weight. Another benefit of this installation method is that you can easily pull out the floor if the partition needs repair or replacement. Additionally, many designer laminate flooring panels can be installed with the click of a button easily by enthusiastic DIYers.

Popular engineered wood flooring patterns

As homeowners search for more affordable, versatile, and flexible wood flooring options, engineered wood flooring continues to thrive in home improvement trends.

However, engineered wood floors come in a wide variety of styles and finishes that vary by wood species, color, texture, and finish. Let’s explore the most popular engineered wood flooring patterns for each category.

species trends

  • White oak designed for laminate flooring
  • European white oak engineered wood flooring
  • Blonde engineered wood floors
  • white engineered wood floors
  • Engineered wood floors in honey and copper colored
  • Gray wood engineered wood floors
  • Greige engineered wood flooring

texture trends

  • engineered wood floors
  • Wired polished engineered wood floors
  • Engineered Wood Flooring

end directions

  • Engineered smoked wood floors
  • Engineered Wood Flooring
  • Matte engineered wood floors
  • Oiled engineered wood flooring

Style trends

  • Herringbone engineered wood floors
  • Wide engineered wood floors

Engineered Wood Flooring Shopping Tips

If you’re in the market for engineered wood flooring, there are a few tips to consider when it comes to shopping. Since not all engineered wood flooring boards are made the same way, keep these tips in mind when shopping from different manufacturers.

Get samples of different styles

Engineered wood flooring is mass-produced. Even if you order flooring from the same manufacturer, mass production methods can result in panels of varying widths, lengths, and thicknesses, which can make installation more complicated. Samples can help you narrow down your selection because you can compare options and see what different thicknesses, colors, and finishes would look like in your home.

Check widths and lengths on any quotes

The average engineered plank is three inches wide and about three feet long. However, some manufacturers can offer slabs from six inches to 10 inches wide. While shopping for engineered wood flooring, check back and check the widths and lengths of your planks at every quote you receive. Don’t rely on oral specification details because receiving the wrong offer may mean you have to buy more panels to complete the job.

Ask about the method of manufacture

Besides the many benefits of engineered wood flooring, one of the reasons for choosing this type of flooring is its appearance. A layer of veneer gives each engineered wood flooring its final look, and there are two ways to create this: dry saw Cut using a saw blade or a rotary peel using a knife blade.

Both produce different properties in terms of aesthetics. A dry saw will create the same visual appearance as a hardwood floor. On the contrary, the sliced 鈥嬧媋nd rotating peeler has a thin peel that does not last as long as the other. Again, this is why ordering samples is so important in the buying process.

Things to consider before buying engineered wood flooring

Keep the following in mind before making any final purchase:

  • Always look for thicker veneer to ensure floors last longer. If the veneer layer is too thin, you will not be able to refinish or refinish the floors, which will require replacing once they are worn out.
  • Find engineered wood flooring with a quality plywood core. Engineered wood floors can withstand moisture and temperature fluctuations better than hardwood types. For the best type of engineered wood flooring, look for those built with a plywood core that has the most flexibility.
  • The more layers of finishing, the more durable your engineered wood floor will be. Besides having a plywood core, you’ll want engineered wood flooring with three to nine layers. The more layers, the more durable the product.
  • Look for options with additional features. Not all engineered wood floors share the same characteristics. Choose one that adapts to your lifestyle and needs. For example, homes with pets and children may prefer waterproof and scratch-resistant panels. Other features include dent resistance, smudging, and pretreatment.

Compare quotes from top-rated local flooring contractors


Frequently asked questions (FAQs)

What is the best thickness for engineered wood flooring?

There is a wide range of veneer thicknesses available to choose from when working with engineered wood floors. However, since you can’t refinish engineered wood floors, you’ll want to look for floors with a thick veneer that allows sanding. Ideally, you want a minimum 3mm veneer layer to allow it to sand at least twice after installation.

How long do engineered wood flooring last?

Quality laminate flooring is a long-term investment that typically lasts 20-30 years. To get the most out of engineered wood floors, avoid products without a UV protective finish and those with a veneer layer thinner than 2mm.

How do you know if you have designed a solid wood?

Since most engineered wood floors float above the subfloor, you can look at the sides to identify them. Pick up a loose board and check the sides. If it’s one solid piece of wood, you have solid wood. If you see different layers of wood, it is most likely engineered wood.

Do you need to seal engineered wood floors?

Most engineered wood floors come pre-engineered. However, it is still a good idea to close them up to add an extra layer of protection to your floor against water damage, scratches, and general wear and tear.

%d bloggers like this: